Deadly Customs MFCR™ Builder
Build your MFCR™ exactly to your requirements. Start with the standard MFCR™ chassis, then add modular components to increase storage, retention, adaptability and role-specific capability.
Each module below includes a concise summary. Full specifications are available on the individual product pages.
1. Base Platform
MFCR™ – Modular Front Carrier Rig
As standard the Deadly Customs MFCR™ Builder gives you our low-profile, high-stability front-mounted platform built for efficient access, balanced load carriage and professional-grade durability. Runs slick or scaled, depending on mission needs.
2. Add-On Modules
Caddy System
A dedicated magazine insert engineered for the MFCR™ is available with our Deadly Customs MFCR™ Builder.
Provides stable, reliable mag retention with a clean, snag-resistant profile. Designed for fast indexing and consistent draw control without adding unnecessary bulk.
Flaps & Velcro Adapter Set
(Combined Upgrade)
A two-part upgrade that enables flap-based retention on the MFCR™ is available with our Deadly Customs MFCR™ Builder.
Includes:
-
Velcro Adapter: Converts the slick front of the MFCR™ into a loop-compatible surface.
-
Flap Panels: Closed-top retention panels for magazines and equipment once the adapter is fitted.
Ideal for users who want a controlled, covered retention solution while maintaining a lightweight front profile.
Dangler Pouch
A compact, low-profile pouch mounted beneath the MFCR™.
Adds accessible storage for medical items, tools, admin essentials or small electronics while keeping the upper rig area clear.
Wing Expander Set
Modular side panels that increase mounting space without impacting mobility.
Suitable for radios, utilities, small pouches or additional magazines. Designed to maintain rig balance and prevent sag under asymmetric loads.
Dual GP Pouch Set
Using the Deadly Customs MFCR™ Builder you can add A matched pair of general-purpose pouches providing flexible storage for field essentials such as tools, gloves, batteries, notebooks or compact sustainment items.
Sold as a pair to maintain a symmetrical, balanced configuration.
3. Additional Information
Full Configuration Overview
A complete MFCR™ setup consists of the core chassis combined with optional expansion modules that enhance carrying capacity and retention. A fully built system typically includes:
-
MFCR™ chassis
-
Caddy magazine insert
-
Velcro Adapter & Flap set
-
Wing Expander Set
-
Dual GP Pouch Set
-
Dangler pouch
This combination represents the MFCR™ at maximum modular capability while retaining a stable, efficient and low-bulk profile suitable for extended use.
Component Breakdown
The MFCR™ system is designed as a cohesive modular ecosystem. Each component fits into a defined position, allowing the user to scale the rig according to operational requirements.
Primary components include:
-
Flaps & Velcro Adapter: Enables flap-based closed-top retention.
-
Caddy Insert: Provides structured internal magazine organisation.
-
Wing Expanders: Add lateral mounting positions for pouches and accessories.
-
General Purpose Pouches (Pair): Provide balanced storage solutions.
-
Dangler Pouch: Adds additional front storage without increasing bulk.
-
Harness & Strapping: Fully adjustable for comfort, layering and load stability.
This breakdown assists users in understanding upgrade paths and modular compatibility.
Colourway Options
The MFCR™ platform and all modular components are available in a consistent range of operational colourways, allowing users to build a fully matched system.
Available colours:
-
Multicam
-
Multicam Black
-
Multicam Tropic
-
Black
-
Coyote Brown
-
Wolf Grey
These options provide flexibility for duty use, range environments, concealed carry considerations and personal preference.
Overview
The Deadly Customs MFCR™ (Modular Fortis Chest Rig) is a purpose-built, modern chest rig that blends modular mission capability with a slim, covert silhouette. Designed for operators, security professionals, and informed civilians who require a rig that performs both overtly and under cover, the MFCR™ delivers a durable platform for mission essentials, flexible mounting options, and thoughtful ergonomics for extended wear.
Built around a dual-layer laser-cut Squadron Laminate chassis and finished in heavy-duty 1500D Squadron Cordura®, the Deadly Customs MFCR™ is equally at home as a standalone chest rig, integrated into a plate carrier system, or configured for low-visibility operations. The result is a lightweight, adaptable system that prioritises usability, cable management, and long-term comfort without sacrificing strength.
What’s included (complete kit)
Purchasing theDeadly Customs MFCR™ complete set is the most cost-effective and ready-to-go option — everything is matched and fitted in the factory, saving time sourcing parts individually.
Key benefits & switching advantages
-
Modular mission placard — pack, swap, and reconfigure quickly for task-specific loadouts.
-
Covert-ready profile — tapered shoulder straps and low-bulk design for concealed carry under jackets or overshirts.
-
Durable construction — dual-layer Squadron Laminate core for structural integrity and abrasion resistance.
-
Cable management — horizontal pass-through channels and hollow straps for clean routing of comms and hydration lines.
-
Comfort features — rear padded cover protects skin from hook Velcro and provides long-wear cushioning.
-
Multiple colourways — operationally proven finishes to suit environment and mission requirements.
Materials & construction: why it matters
At its core the MFCR™ uses two layers of laser-cut Squadron Laminate bonded into a rigid, yet slightly flexible platform. This construction delivers:
-
Exceptional durability: Squadron Laminate resists abrasion and delamination in prolonged field use.
-
Stable mounting platform: The dual-layer chassis prevents sag and deformation when loaded with mags, radios, or medical gear.
-
Precision fit: Laser-cut MOLLE and pass-through features ensure repeatable, tight fitment for single-column accessories.
The outer finishes are 1500D Squadron Cordura®, selected for UV resistance, colorfastness, and longevity. All stitched areas use reinforced bar-tacks and industry-grade webbing, while hardware is corrosion-resistant to endure maritime or humid environments.
Design details & mission-focused features
Modular Front Placard (MFP™)
The MFP™ is the MFCR™’s workhorse — a mission-configurable placard that accepts single-column MOLLE accessories, admin pouches, medical inserts, and radio mounts. It can be removed and re-mounted quickly, simplifying mission swaps and laundering.
MOLLE ladder & tie-down points
Integrated front straps use a MOLLE ladder that accepts single-column attachments and small accessories. Additional tie-down points are included for securing PTTs, tourniquets, or small tools using paracord, bungee, or dedicated looped retention.
Cable management & stealth routing
Operators can route cables or tubes through either:
-
Horizontal pass-through channels — ideal for one-wrap or shock cord retention across the harness exterior.
-
Hollow strap routing — run wires or hydration tubing inside shoulder straps for a truly snag-free, streamlined profile.
This dual approach offers flexibility: external routing for rapid access and service, internal routing for concealment and snag protection.
Ergonomics & comfort
-
Tapered shoulder straps reduce bulk over the shoulders and improve articulation when moving or shooting.
-
Concealed top buckles eliminate pressure points — the top two buckles sit inside the harness so they won’t dig into the user.
-
Rear padded cover shields skin from abrasive hook Velcro and adds a comfort layer for long missions.
Colourways & finish options
The Deadly Customs MFCR™ is available in mission-focused colours to match kit and environment:
-
MultiCam®
-
MultiCam Black™
-
MultiCam Tropic™
-
Ranger Green
-
Black
-
Coyote Brown
Each colour is chosen for operational performance — durability, fade resistance, and tactical appearance.
Use cases — who benefits most?
-
Tactical teams & law enforcement: a modular solution for entry, patrol, and covert surveillance tasks.
-
Private security & close protection: covert wearability allows a low-visibility footprint while carrying essential gear.
-
Civilians & adventurers: modularity and comfort make the MFCR™ suitable for range days, hiking, or event security.
-
Medical & support units: configure med pouches and tourniquet mounts without a full plate carrier.
-
Airsoft & training: durable enough for frequent use and easy to reconfigure between scenarios.
Setup & compatibility notes
-
The MFCR™ is designed to work seamlessly with single-column MOLLE accessories and industry-standard attachment hardware.
-
You will need to add dedicated retention flaps, Velcro adaptors, and inserts depending on your pouches and mission loadout — these are not included with the rig.
-
Hardware supplied with the rig is compatible with typical 3-screw mounting systems for common accessories and platforms.
Care & maintenance
To ensure long service life:
-
Clean with a soft brush and mild detergent; avoid harsh solvents.
-
Air dry away from direct sunlight; do not use high heat.
-
Inspect regularly for worn stitching or frayed webbing; replace or repair as needed.
-
Store in a cool, dry place when not in use to prevent mildew and reduce UV degradation.
Frequently Asked Questions (FAQ)
Q: Can I wear the MFCR™ under a jacket for plainclothes operations?
A: Yes. The tapered straps and slim profile are designed for concealed carry beneath light outerwear or overshirts.
Q: Is the MFCR™ compatible with plate carriers?
A: Yes. The MFCR™ can be integrated or layered with plate carriers, depending on your plate carrier’s configuration and attachment options.
Q: Are retention flaps and magazine inserts included?
A: No. Retention flaps, Velcro adaptors, and internal inserts must be purchased separately to customise your loadout.
Q: Can I run a hydration tube through the harness?
A: Yes. Use the pass-through channels or internal hollow strap routing for clean hydration tube routing.
Q: How rugged is the material in saltwater or humid environments?
A: The squadron laminate and 1500D Cordura® are selected for abrasion and UV resistance; hardware is corrosion-resistant, but we recommend rinsing with fresh water and drying after saltwater exposure.
Comparison: MFCR™ vs traditional chest rigs
-
Modularity: MFCR™ uses a removable MFP™ placard and laser-cut MOLLE for faster reconfiguration.
-
Profile: MFCR™ has a lower, sleeker profile that favours covert use.
-
Durability: Dual-layer Squadron Laminate provides a stiffer mounting platform than single-layer textile rigs.
-
Comfort: Integrated padding and concealed hardware reduce hotspots often found in older rigs.
Product specifications (at-a-glance)
-
Core material: Dual-layer Squadron Laminate
-
Outer fabric: 1500D Squadron Cordura®
-
Included: H-harness, back strap, MFP™, rear padded cover
-
Compatibility: Single-column MOLLE accessories, standard mounting hardware
-
Colours: MultiCam®, MultiCam Black™, MultiCam Tropic™, Ranger Green, Black, Coyote Brown
-
Origin: Designed and assembled (or manufactured) to Deadly Customs standards
Call to action
Upgrade to a modern, mission-flexible chest rig engineered for covert and overt operations. The Deadly Customs MFCR™ delivers the stability of a placard system with the fit and stealth of a concealment rig. Add to cart now or contact our support team for custom configurations, accessory recommendations, and loadout assistance.
Visit our Facebook page www.facebook.com/deadlycustoms




















